Detalles del anuncio
2022Volver
[X]

Troubleshooting of zipper

NIngbo – Zhejiang – China, cerca Shanghai18868944843Facebook
Twitter
http://www.zipper-manufacturers.com
Industria > OTHERS
Origen
Zhejiang.
Descripción

Troubleshooting of zipper
1. When the opening and closing is not smooth, if the chain head is pulled forcibly, it will cause the teeth to bite. At this time, apply paraffin or lubricating spray [FASTENERMATE] to the surface and inside of the gear, and then move the slider several times to loosen it.
2. The zipper on the bag when there are too many things, if the zipper is closed and closed, the force of the zipper is too large, and the teeth will be separated from the belt. This is serious in terms of zipper failure. Pull the left and right teeth closer together to make it easy for the chain head to pass through and close the zipper.
3. When opening and closing the zipper, sometimes the chain head bites the line segment or the fabric and the slider cannot be pulled. In this case, if the slider is forced to be pulled, the bite will be deeper and deeper, and the slider should be reversed on the one hand. Untie the fabric on the one hand. When fully bite in, do not pull the slider vigorously, but slowly back the slider. Also, when sewing zippers, please do not leave hidden dangers.
4. The clothes are worn for a long time and the zipper is not easy to use, because the slider of the zipper becomes loose. At this time, you can use pliers (you can also use your teeth to bite) to pinch the slider to make the slider tighter. A zipper would work just fine.

Comerciar
Alianza
Enlace de Referencia
Enviar mensaje
Seguir usuario
COMENTARIOS
Agregar comentario
Enviar